
The CBD e-liquid is a nicotine-free alternative to enjoy vaping while benefiting from the potential properties of cannabidiol (CBD), a natural component of cannabis with no psychoactive effects. It provides a relaxing vaping experience suited to everyday wellness.
Carefully crafted, the CBD is extracted from the cannabis plant and then diluted in a mixture of propylene glycol (PG) and vegetable glycerin (VG) to ensure efficient vaporization and optimal absorption. CBD e-liquids can be flavored with a wide variety of flavors, ranging from fruits to more natural hemp notes.
The CBD concentration varies according to needs: it can be low for a mild experience or higher for a more pronounced effect, allowing each user to find their ideal dosage.
Dosage refers to the amount of CBD present in each bottle. The most common ones:
1 to 5% or 100 to 500 mg: a gentle introduction to CBD, ideal for beginners;
10 to 20% or 1,000 mg to 2,000 mg: intermediate concentration, moderate effect;
50% or 5,000 mg: high concentration for experienced users.
It is recommended to start with a low dosage and gradually adjust according to your needs and sensations. CBD-concentrated boosters are also available to enrich or personalize your e-liquid.
Choosing the right equipment
E-cigarette or pod with coils and moderate wattage.
Avoid high wattages: CBD degrades with excessive heat.
Vaping technique
Take short puffs and wait a few moments between each inhalation.
Vaping slowly allows you to appreciate the flavor and observe the effects of the CBD.
Adjust the concentration
Start with a low CBD bottle.
Gradually increase until you find the ideal dosage.
CBD e-liquids are fluid and behave like propylene glycol-rich e-liquids.
MTL e-cigarettes:
Kit Wenax M2 by GeekVape;
Kit Aegis Solo 3 MTL by GeekVape;
Kit GTX One Pro by Vaporesso;
Kit Drag S3 by Voopoo.
High-performance pods:
Kit Pixo by Aspire;
Kit Argus G3 by Voopoo;
Kit Klypse Pro by Innokin.
MTL clearomizers:
Clearomizer Z Nano MTL by GeekVape;
Clearomizer Q16 Pro by JustFog;
Clearomizer Nautilus 3SR by Aspire.
Ideal coils: 0.8 to 1.8 ohm
Recommended drip tip: narrow and elongated to concentrate the flavors
Clean the clearomizer and drip tip regularly;
Replace the coil when flavors diminish;
Avoid leaving your e-liquid in the tank for more than 5 days (risk of oxidation and degradation of CBD molecules).
Product without nicotine but not recommended for minors;
Check for potential allergens;
Store away from light and out of reach of children.
Respect bottle recycling
A natural alternative to optimize your relaxation;
Experience without dependency, without THC or psychoactive effects;
Customizable according to your tastes and needs;
Compatible with a healthy and environmentally friendly lifestyle.
CBD for vaping offers a smooth and relaxing experience, suited to both beginners and experienced vapers.
Data sheet
| Propylene Glycol | 80% |
|---|---|
| Vegetable Glycerin | 20% |
| Capacity | 10 ml |
| Origin | France |
| Brand | Le CBD Discount |
| Flavor type | Hemp |
| Product type | CBD E-liquid |
| CBD level | 3% - 5% - 10% |
| THC level | 0% |
| Extraction type | Broad Spectrum |
Related products
Be the first to leave a review!
This product has no reviews yet. Try it, share your experience and help others make the right choice.
An e-liquid (or liquid for e-cigarettes) is the product that generates vapour when heated by the coil of an e-cigarette. Unlike traditional cigarettes, there is no combustion. The e-liquid is composed of a base (propylene glycol and vegetable glycerin), flavourings, and optionally nicotine. It is what determines the taste, the throat sensation, the cloud production, and the overall vaping experience.
An e-liquid generally contains four elements:
Some formulas also use alternative plant-based bases (Végétol) for a smoother experience.
An e-liquid with nicotine is intended for vapers who want to replace traditional cigarettes. Nicotine acts on the feeling of satisfaction and limits cravings. Nicotine-free e-liquids are used either at the end of a cessation programme or purely for the pleasure of vaping, even though it is not recommended to vape if you are not a smoker. Choosing the right nicotine level is essential to avoid a bad experience (irritation or cravings). The nicotine dosage depends on your previous cigarette consumption. A light smoker will not have the same needs as a heavy smoker. A level that is too low can lead to frustration and relapse, while a level that is too high can cause throat discomfort. The goal is to find a balance between throat hit, sensation and vaping comfort, adjusting gradually if needed. A low dosage of 0, 3 or 6 mg/ml of nicotine is generally recommended for light smokers or occasional smokers (fewer than 7 cigarettes per day), and a high dosage of 20 mg/ml of nicotine salt for heavy smokers (1 packet of cigarettes or more). However, this dosage can be adjusted depending on your e-cigarette and the way you vape.
Nicotine salt is a more stable and smoother form of nicotine to inhale. It provides fast absorption with a less harsh throat hit, even at high levels. Nicotine salt e-liquids are particularly well suited to beginner vapers, former heavy smokers and low-wattage MTL kits. Various nicotine salt dosages are available. The most well-known and effective is 20 mg/ml, highly suited for heavy smokers. However, a dosage of 10 mg/ml can work very well for regular or occasional smokers.
A nicotine shot is a concentrated nicotine bottle designed to be added to a large-format e-liquid. It allows you to adjust the final nicotine level according to the quantity added. Flexible and cost-effective, this solution allows you to boost your large-format e-liquid to 3 or 6 mg/ml of nicotine. For a 50 ml e-liquid, adding one nicotine shot will give you 3 mg/ml; two nicotine shots will turn your e-liquid into 6 mg/ml.
The propylene glycol / vegetable glycerine ratio strongly influences the vape.
The choice therefore depends on the power and compatibility with your electronic cigarette. If in doubt, the most common ratio remains 50/50 PG/VG. Balanced, it allows versatile use across MTL, RDL, and light DTL electronic cigarette models (approximately 15 to 40 watts).
E-liquids with a vegetable base or with Végétol replace traditional propylene glycol. They are often gentler on the throat, better tolerated by vapers who are sensitive to PG, and offer a smoother vape without compromising on flavour. However, they should be used in MTL at low power (minimum 30 watts) to avoid the risk of leaks and to preserve the quality of the product.
Yes, CBD e-liquids are designed for vaping and generally do not contain nicotine. They offer a different sensation, focused on relaxation, without any addictive effect. They should be used at moderate power to preserve the quality of the product. Opt for an MTL electronic cigarette with a tight draw.
E-liquids are considered a much healthier alternative to smoked tobacco. They are formulated from ingredients certified as safe for health, unlike the 7,000 harmful substances found in traditional cigarettes. Nevertheless, to choose a safe e-liquid, a few precautions should be taken, such as buying your e-liquid from a recognised retailer like Le Vapoteur Discount or checking the composition and origin by favouring reputable and controlled brands.
An e-liquid manufactured in France meets strict requirements and European directives regarding traceability, quality control, and safety. As a mark of quality and transparency for the consumer, French and European brands generally have their own laboratory for developing their e-liquid formulas and are required to have that formulation assessed by an independent laboratory before it goes to market. These steps guarantee e-liquids that are safe for vapers. These French and European quality standards prohibit undesirable substances and provide a more secure framework for vaping.
To keep your e-liquid as long as possible and preserve its quality, taste, and colour, you should keep it in its original bottle and ideally away from light, heat, and air. Despite these precautions, the e-liquid may take on a slightly brown tint. Safe and suitable for consumption, this colour is due to the oxidation of nicotine and may also depend on the flavouring used in the e-liquid. It is generally recommended not to keep the same e-liquid in your clearomiser or pod cartridge for more than 5 days if you are not using it, to avoid leaks and excessive oxidation.
The DLUO (Date Limite d'Utilisation Optimale) or BBD (Best Before Date) is an indicative date. Once the e-liquid's date has passed, it may lose its taste qualities and appearance (colour, fluidity). An e-liquid straight from the factory will have a BBD of approximately 2 years. Even past the BBD, the e-liquid remains suitable for vaporisation and will not be harmful to health.
Patches, hypnosis, laser, support, replacements… Compare the best methods to quit smoking and find the one that suits you.
Is your electronic cigarette no longer working correctly? Discover solutions to the most common problems for a worry-free vaping experience!
What are the effects of quitting smoking? Discover the short, medium, and long-term benefits that will make you want to stop cigarettes!
Craquez aussi pour