E-liquid Le Protecteur 100 ml Replay - Liquidarom

An e-liquid is a consumable intended exclusively for electronic cigarettes. The 100 ml format is sold nicotine-free, generally in a 120 ml bottle designed to hold up to two boosters. It can be vaped as it is at 0 mg/ml or topped up with one or two nicotine boosters. For a higher strength, the mixture is prepared in a large graduated empty bottle. Slightly higher in vegetable glycerine than a 50/50, it provides more generous vapour and a milder throat hit, while retaining good flavour reproduction, for semi-direct inhalation (RDL).

Adding a booster is optional: 100 ml e-liquid can be vaped perfectly well without nicotine. If you want nicotine, the number of boosters added determines the final strength:

The strengths obtained are rounded (exactly 1.8, 3.3, 4.6 and 5.7 mg/ml). The original 120 ml bottle can hold a maximum of two boosters: from three boosters onwards, the mixture must be transferred to a large bottle. With RDL vaping, nicotine is felt slightly more strongly than with MTL: two boosters are often sufficient. For a nicotine requirement above 6 mg/ml, the 10 ml format or nicotine salts are more suitable.

Up to 3 mg/ml, in the original bottle:

For approximately 4.5 or 6 mg/ml, in a large graduated bottle: pour the full 100 ml into a 250 ml empty graduated bottle, add three boosters for approximately 4.5 mg/ml (130 ml) or four boosters for approximately 6 mg/ml (140 ml), close it, shake and leave to rest for a few minutes. Find all empty bottles in the DIY accessories section.

Le Vapoteur Discount boosters come in 10 ml bottles (strength stated on each product page). The type of nicotine and the base alter the throat sensation. With a 40/60 e-liquid, each 50/50 booster slightly increases the PG proportion: the mixture remains close to 42/58.

Find the full range in the nicotine boosters category.

An e-liquid is made up of a base of propylene glycol (PG) and vegetable glycerine (VG), flavourings and, where applicable, nicotine. PG carries the flavours and throat hit, while VG provides smoothness and vapour volume. With 60% VG, this ratio sits between 50/50 and 30/70: denser vapour than 50/50, a smooth throat sensation and flavours that are still clearly present.

Slightly thicker than a 50/50, a 40/60 e-liquid is suitable for coils from 0.4 to 1.0 Ω. In a pod with a very tight draw (coil above 1.2 Ω), it may soak into the cotton more slowly.

The 40/60 ratio performs well with versatile RDL-oriented devices, capable of properly supplying a 0.4 to 1.0 Ω coil. Here are the most suitable types of device and some examples available from Le Vapoteur Discount:

The coil resistance and power determine the vaping style. With a 100 ml 40/60 e-liquid, the following guidelines provide stable vaping:

Always start at the bottom of the power range indicated on the coil, then increase gradually. For the drip tip, a 510 tip is suitable for an intermediate draw; for RDL, an 810 drip tip makes vapour flow easier on clearomisers designed for this format.

Le Vapoteur Discount selects e-liquids from the leading vaping brands, checked for compliance and traceability. Le Vapoteur Discount also designs its own e-liquids made in France, divided into several ranges: