Flavour: wild berries
Composition: 40% Propylene Glycol and 60% Vegetable Glycerin (40/60 PG/VG)
Nicotine strength: 3 mg or 6 mg
Packaging:
- 3 mg: 75 ml bottle filled to 50 ml, accompanied by one nicotine booster dosed at 18 mg/ml
- 6 mg: 75 ml bottle filled to 40 ml, accompanied by two nicotine boosters dosed at 18 mg/ml
Made in France by Pulp![]()
An e-liquid is a consumable intended exclusively for an e-cigarette. The 60 ml format comes as a mix pack: a partially filled bottle of nicotine-free e-liquid, accompanied by one or two 20 mg/ml nicotine boosters. Once the boosters have been poured into the bottle, you get 60 ml of e-liquid at 3 or 6 mg/ml. Slightly higher in vegetable glycerine than a 50/50 blend, it delivers more generous vapour and a smoother throat hit while retaining good flavour reproduction, for restricted direct-to-lung (RDL) vaping.
The volume of e-liquid in the bottle is adjusted according to the number of boosters supplied, so that in both cases you obtain 60 ml of e-liquid at the stated strength:
| Final strength | Bottle | Boosters supplied | Final volume | Profile |
|---|---|---|---|---|
| 3 mg/ml | 50 ml nicotine-free e-liquid | 1 booster of 10 ml at 20 mg/ml | 60 ml | Occasional smoker, RDL vaping |
| 6 mg/ml | 40 ml nicotine-free e-liquid | 2 boosters of 10 ml at 20 mg/ml | 60 ml | Moderate smoker, MTL or restricted RDL vaping |
The nicotine strength is selected when ordering: it depends on the pack and cannot subsequently be changed without adding base or a booster. In RDL, nicotine is felt slightly more strongly than in MTL: the 3 mg/ml pack is often the most comfortable.
Once mixing is complete, the bottle contains 60 ml: there is no room for an additional booster. For a different strength, 50 ml e-liquids and the 10 ml format allow you to adjust the dosage.
An e-liquid is made up of a base of propylene glycol (PG) and vegetable glycerine (VG), flavourings and, where applicable, nicotine. PG carries the flavours and throat hit, while VG provides smoothness and vapour volume. With 60% VG, this ratio sits between 50/50 and 30/70: denser vapour than a 50/50 blend, a smooth throat sensation and flavours that remain well defined.
| PG/VG ratio | 70/30 | 50/50 | 40/60 | 30/70 |
|---|---|---|---|---|
| Flavour reproduction | ●●●● | ●●●○ | ●●●○ | ●●○○ |
| Throat hit | ●●●● | ●●●○ | ●●○○ | ●○○○ |
| Vapour production | ●○○○ | ●●○○ | ●●●○ | ●●●● |
| Suitable equipment | Pods, MTL tanks | Pods, kits, MTL and RDL tanks | Versatile kits, RDL tanks | Mods, sub-ohm tanks (DL) |
Slightly thicker than a 50/50 blend, a 40/60 e-liquid is suitable for coils from 0.4 to 1.0 Ω. In a pod with a very tight draw (coil above 1.2 Ω), it may saturate the cotton more slowly.
40/60 performs best with versatile RDL-oriented equipment, capable of properly supplying a 0.4 to 1.0 Ω coil. Here are the most suitable equipment categories and a few examples available from Le Vapoteur Discount:
| Equipment | Key features | Examples |
|---|---|---|
| E-cigarettes | Versatile kits, adjustable from open MTL to RDL. | Kit Coolfire Z80 Zenith 2 – Innokin Kit Gozee – Innokin Kit GTX One Pro 40 W – Vaporesso |
| Pods | Pods with adjustable airflow, compatible with coils from 0.4 to 1.0 Ω. | Kit Luxe XR Max 2 – Vaporesso Kit Pixo Max – Aspire Kit Drag X3 – Voopoo |
| Tanks | Choose RDL models compatible with coils from 0.4 to 1.0 Ω. | Zenith 2 – Innokin Z Nano 3 – GeekVape GOZ+ – Innokin |
The coil resistance and power determine the type of draw. With a 60 ml 40/60 e-liquid, the following guidelines provide stable vaping:
| Coil resistance | Type of draw | Suggested power |
|---|---|---|
| 0.8 to 1.0 Ω | MTL to RDL – intermediate draw | 15 to 22 W |
| 0.6 to 0.8 Ω | RDL – semi-airy draw | 20 to 30 W |
| 0.4 to 0.6 Ω | RDL – more open draw | 25 to 40 W |
Always start at the lower end of the power range indicated on the coil, then increase gradually. As for the drip tip, a 510 tip is suitable for an intermediate draw; for RDL, an 810 drip tip makes vapour flow easier on clearomisers designed for this format.
Remember to recycle: dispose of empty bottles at suitable collection points.
Le Vapoteur Discount selects e-liquids from the leading vaping brands, checked for compliance and traceability. Le Vapoteur Discount also designs its own e-liquids made in France, divided into several ranges:
| Range | Flavour profile | Formats |
|---|---|---|
| Le Vapoteur Discount | The original range: single-flavour classic, fruity, gourmet and menthol e-liquids | 10 ml and 50 ml |
| Classic Time | Pure classic and gourmet classic flavours | 10 ml, nicotine salts and 50 ml |
| First One | Fruity and gourmet recipes | 10 ml and 50 ml |
| Fruity Fresh | Fresh fruit duos and trios | 10 ml and 50 ml |
| The Raid | Berry flavours, original or chilled | 10 ml and 50 ml |
| Flower Season | Floral and fruity blends | 10 ml and 50 ml |
| Goody | Gourmet flavours: pastries, caramel, coffee and nuts | 10 ml and 50 ml |
| Sunset Hour | Cocktail-inspired flavours | 10 ml and 50 ml |
| Les Bangers | Fruity, sweet, drink and gourmet recipes | 10 ml and 50 ml |
| Puff Attack | Fruity and fresh flavours inspired by puffs | 10 ml nicotine salts and 50 ml |
| Trinity X | Fruity, fresh or sweet blends | 50 ml |
Features
| Propylene Glycol | 40% |
|---|---|
| Vegetable Glycerin | 60% |
| Capacity | 60 ml |
| Origin | France |
| Brand | Pulp |
| Flavor type | Fruity |
| Product type | E-liquid |
| Collection | Pulp Kitchen |
Delivery times and costs, returns, right of withdrawal and warranty are detailed on our dedicated page.
See delivery and returnsIf you don't smoke, don't vape.
E-liquid for electronic cigarettes
E-liquid refills labelled in accordance with Article 48 of Regulation (EC) No 1272/2008
Warning: follow the instructions for use
From 2.5 to 16.6 mg/ml: H302. Harmful if swallowed (category 4)
C'est le seul qui a le goût du fruit rouge...
excellent
bien
Trés bon gout
Mon all-day, ni trop sucré, ni trop chimique. La recette est au top. Vrai bon goût de fruits rouges naturel là où beaucoup de concurrents ratent le mélange. Pas de menthol en plus, donc c'est un plus vu le nombre qu'il y a sur le marché.
Produit conforme, tarif compétitif. au top je recommande
Ras
Related products
An e-liquid (or liquid for electronic cigarettes) is the product that generates vapour when heated by the coil of an electronic cigarette. Unlike traditional cigarettes, there is no combustion. The e-liquid is made up of a base (propylene glycol and vegetable glycerine), flavourings, and optionally nicotine. It determines the taste, the throat sensation, cloud production, and the overall vaping experience.
An e-liquid generally contains four elements:
Some formulas also use alternative plant-based bases (Végétol) for added smoothness.
An e-liquid with nicotine is intended for vapers who wish to replace the traditional cigarette. Nicotine acts on the sensation of satisfaction and limits cravings. Nicotine-free e-liquids are used either at the end of a quit-smoking programme, or purely for the pleasure of vaping, even though it is not recommended to vape if you are not a smoker. Choosing the right nicotine level is essential to avoid a poor experience (irritation or cravings). The nicotine dosage depends on your previous cigarette consumption. A light smoker will not have the same needs as a heavy smoker. A level that is too low can lead to frustration and relapse, while a level that is too high can cause throat discomfort. The goal is to find a balance between hit, sensation, and vaping comfort, adjusting progressively if needed. As a general rule, a low dosage of 0, 3, or 6 mg/ml of nicotine is recommended for light or occasional smokers (fewer than 7 cigarettes per day), and a high dosage of 20 mg/ml nicotine salt for heavy smokers (1 packet of cigarettes or more). However, this dosage can be adjusted depending on your e-cigarette and your vaping style.
Nicotine salt is a more stable and smoother form of nicotine to inhale. It provides rapid absorption with a less harsh throat hit, even at high levels. Nicotine salt e-liquids are particularly suited to beginner vapers, former heavy smokers, and low-powered MTL kits. Nicotine salt is available in various strengths. The most well-known and effective is 20 mg/ml, which is highly suited to heavy smokers. However, a 10 mg/ml strength can be perfectly suitable for a regular or occasional smoker.
A nicotine booster is a nicotine-concentrated bottle designed to be added to a large-format e-liquid. It allows you to adjust the final nicotine level according to the quantity added. Flexible and cost-effective, this solution allows you to boost your large-format e-liquid to 3 or 6 mg/ml of nicotine. For a 50 ml e-liquid, adding one nicotine booster will result in 3 mg/ml, while two nicotine boosters will bring your e-liquid up to 6 mg/ml.
The propylene glycol / vegetable glycerin ratio strongly influences the vaping experience.
The choice therefore depends on the power and compatibility with your e-cigarette. If in doubt, the most common ratio remains 50/50 PG/VG. Balanced, it allows versatile use on MTL, RDL, and light DTL e-cigarette models (between approximately 15 and 40 watts).
Plant-based e-liquids or those made with Végétol replace traditional propylene glycol. They are often gentler on the throat, better tolerated by vapers who are sensitive to PG, and offer a smoother vaping experience without compromising on flavour. However, they should be used in MTL mode at low power (minimum 30 watts) to avoid the risk of leaks and to preserve the quality of the product.
Yes, CBD e-liquids are designed for vaping and generally do not contain nicotine. They offer a different sensation, focused on relaxation, without any addictive effect. They should be used at moderate power to preserve the quality of the product. A tight-draw MTL e-cigarette is recommended for use with them.
E-liquids are considered a much healthier alternative to smoked tobacco. They are formulated from ingredients certified as safe for health, unlike the 7,000 harmful substances found in traditional cigarettes. Nevertheless, to choose a safe e-liquid, a few precautions should be taken, such as purchasing your e-liquid from a recognised retailer such as Le Vapoteur Discount, or checking the composition and origin by favouring reputable and regulated brands.
An e-liquid manufactured in France meets strict requirements and European directives regarding traceability, quality control and safety. As a guarantee of quality and transparency for consumers, French and European brands generally have their own laboratory for developing their e-liquid formula and are required to have that formulation assessed by an independent laboratory before it goes to market. These steps ensure that e-liquids are safe for vapers. French and European quality standards prohibit undesirable substances and provide a more secure framework for vaping.
To keep your e-liquid for as long as possible and preserve its quality, taste, and colour, store it in its original bottle, ideally away from light, heat, and air. Despite these precautions, the e-liquid may sometimes take on a slightly brown tint. Safe and fit for consumption, this colour is due to the oxidation of the nicotine and may also depend on the flavouring used in the e-liquid. It is generally advised not to keep the same e-liquid in your clearomiser or pod cartridge for more than 5 days if you are not using it, to avoid leaks and excessive oxidation.
The DLUO (Date Limite d'Utilisation Optimale) or BBD (Best Before Date) is an indicative date. Once the e-liquid's date has passed, it may lose its taste qualities and its appearance (colour, fluidity). A factory-fresh e-liquid will have a BBD of around 2 years. Even past the BBD, the e-liquid remains safe to vaporise and will not be harmful to health.