Dosage : 5% (500 mg)
Composition : broad spectrum CBD extract, vegetable mono propylene glycol, organic vegetable glycerine, traces of CBG and CBDV, terpenes
Flavour : mint
Volume: 10 ml
The 10 ml Double Mint CBD e-liquid by Novaloa is infused with broad spectrum CBD, allowing you to fully enjoy the benefits of the cannabinoid without the presence of THC. Enjoy a relaxing vape free from psychotropic effects, ideal for a completely worry-free experience.
Made in France by Novaloa
![]()

The CBD e-liquid is a nicotine-free alternative to enjoy vaping whilst benefiting from the potential properties of cannabidiol (CBD), a natural component of cannabis with no psychoactive effects. It provides a relaxing vaping experience tailored to everyday well-being.
Carefully crafted, the CBD is extracted from the cannabis plant and then diluted in a blend of propylene glycol (PG) and vegetable glycerine (VG) to ensure efficient vaporisation and optimal absorption. CBD e-liquids can be flavoured with a wide variety of flavours, ranging from fruits to more natural hemp notes.
The CBD concentration varies according to needs: it can be low for a mild experience or higher for a more pronounced effect, allowing each user to find their ideal dosage.
The dosage refers to the amount of CBD present in each bottle. The most common:
1 to 5% i.e. 100 to 500 mg: a gentle introduction to CBD, ideal for beginners ;
10 to 20% i.e. 1000 mg to 2000 mg: intermediate concentration, moderate effect ;
50% i.e. 5,000 mg: high concentration for experienced users.
It is recommended to start with a low dosage and gradually adjust according to your needs and feelings. CBD-concentrated boosters are also available to enrich or personalise your e-liquid.
Choosing the right equipment
Electronic cigarette or pod with moderate coils and wattage.
Avoid high wattages: CBD degrades with excessive heat.
Vaping technique
Take short puffs and wait a few moments between each inhalation.
Vaping slowly allows you to appreciate the flavour and observe the effects of CBD.
Adjusting the concentration
Start with a low-CBD bottle.
Gradually increase until you find the ideal dosage.
CBD e-liquids are fluid and behave like e-liquids high in propylene glycol.
MTL electronic cigarettes :
Kit Wenax M2 by GeekVape ;
Kit Aegis Solo 3 MTL by GeekVape ;
Kit GTX One Pro by Vaporesso ;
Kit Drag S3 by Voopoo.
High-performance pods :
Kit Pixo by Aspire ;
Kit Argus G3 by Voopoo ;
Kit Klypse Pro by Innokin.
MTL clearomisers :
Clearomiser Z Nano MTL by GeekVape ;
Clearomiser Q16 Pro by JustFog ;
Clearomiser Nautilus 3SR by Aspire.
Ideal coils: 0.8 to 1.8 ohm
Recommended drip tip: narrow and elongated to concentrate the aromas
Clean the clearomiser and drip tip regularly ;
Replace the coil when flavours diminish ;
Avoid leaving your e-liquid in the tank for more than 5 days (risk of oxidation and degradation of CBD molecules).
Product without nicotine but not recommended for minors ;
Check for any allergens ;
Store away from light and out of reach of children.
Follow bottle recycling guidelines
A natural alternative to optimise your relaxation ;
An experience without dependence, without THC or psychoactive effects ;
Customisable according to your tastes and needs ;
Compatible with a healthy and environmentally friendly lifestyle.
CBD for vaping offers a gentle and relaxing experience, suited to both beginners and experienced vapers.
Features
| Vegetable Glycerin | 30% |
|---|---|
| Capacity | 10 ml |
| Origin | France |
| Brand | Novaloa |
| Flavor type | Menthol |
| Product type | CBD E-liquid |
| CBD level | 5% |
Delivery times and costs, returns, right of withdrawal and warranty are detailed on our dedicated page.
See delivery and returnsIf you don't smoke, don't vape.
E-liquid for electronic cigarettes
E-liquid refills labelled in accordance with Article 48 of Regulation (EC) No 1272/2008
Warning: follow the instructions for use
From 2.5 to 16.6 mg/ml: H302. Harmful if swallowed (category 4)
Be the first to leave a review!
This product has no reviews yet. Try it, share your experience and help others make the right choice.
Related products
An e-liquid (or liquid for electronic cigarettes) is the product that generates vapour when heated by the coil of an electronic cigarette. Unlike traditional cigarettes, there is no combustion. The e-liquid is composed of a base (propylene glycol and vegetable glycerin), flavourings, and optionally nicotine. It determines the taste, throat sensation, cloud production, and the overall vaping experience.
An e-liquid generally contains four elements:
Some formulas also use alternative plant-based bases (Végétol) for added smoothness.
An e-liquid with nicotine is intended for vapers who wish to replace traditional cigarettes. Nicotine acts on the feeling of satisfaction and reduces cravings. Nicotine-free e-liquids are used either at the end of a quit-smoking programme or purely for the pleasure of vaping, although it is not recommended to vape if you are not a smoker. Choosing the right nicotine strength is essential to avoid a poor experience (irritation or cravings). The nicotine dosage depends on your previous cigarette consumption. A light smoker will not have the same needs as a heavy smoker. A strength that is too low can lead to frustration and relapse, whilst a strength that is too high can cause throat discomfort. The aim is to find a balance between hit, sensation and vaping comfort, adjusting gradually as needed. A low dosage of 0, 3 or 6 mg/ml of nicotine is generally recommended for light smokers or occasional smokers (fewer than 7 cigarettes per day), and a high dosage of 20 mg/ml nicotine salt for a heavy smoker (1 packet of cigarettes or more). However, this dosage can be adjusted depending on your electronic cigarette and the way you vape.
Nicotine salt is a more stable form of nicotine that is smoother to inhale. It provides rapid absorption with a less harsh throat hit, even at high concentrations. Nicotine salt e-liquids are particularly suitable for beginner vapers, former heavy smokers and low-wattage MTL kits. Different nicotine salt strengths are available. The best-known and most effective being 20 mg/ml, highly suitable for heavy smokers. However, a 10 mg/ml strength may work very well for a regular or occasional smoker.
A nicotine shot is a concentrated nicotine bottle designed to be added to a large-format e-liquid. It allows the final nicotine strength to be adjusted according to the quantity added. Flexible and cost-effective, this solution lets you boost your large-format e-liquid to 3 or 6 mg/ml of nicotine. For a 50 ml e-liquid, adding one nicotine shot will give you 3 mg/ml, while adding two nicotine shots will turn your e-liquid into a 6 mg/ml.
The propylene glycol / vegetable glycerin ratio has a strong influence on the vape experience.
The choice therefore depends on the wattage and compatibility with your electronic cigarette. If in doubt, the most common ratio remains 50/50 PG/VG. Balanced, it allows versatile use on MTL, RDL and light DTL electronic cigarette models (between approximately 15 and 40 watts).
Plant-based e-liquids or Végétol-based e-liquids replace traditional propylene glycol. They are often gentler on the throat, better tolerated by vapers who are sensitive to PG, and offer a smoother vape without compromising on flavour. However, they should be used in MTL mode at a low wattage (minimum 30 watts) to avoid the risk of leaks and to preserve the quality of the product.
Yes, CBD e-liquids are designed for vaping and generally do not contain nicotine. They offer a different sensation, focused on relaxation, with no addictive effect. They should be used at a moderate wattage to preserve the quality of the product. A tight-draw MTL electronic cigarette is recommended for use with them.
E-liquids are considered a far healthier alternative to smoked tobacco. They are formulated from certified ingredients that pose no health risks, unlike the 7,000 harmful substances found in traditional cigarettes. Nevertheless, to choose a safe e-liquid, a few precautions should be taken, such as purchasing your e-liquid from a recognised retailer such as Le Vapoteur Discount, or checking the composition and origin by favouring reputable and regulated brands.
An e-liquid manufactured in France meets strict requirements and European directives regarding traceability, quality control and safety. As a guarantee of quality and transparency for the consumer, French and European brands generally have their own laboratory for developing their e-liquid formula, and are required to have that formulation assessed by an independent laboratory before it is placed on the market. These steps ensure that e-liquids are safe for vapers. These French and European quality standards prohibit undesirable substances and provide a more secure framework for vaping.
To keep your e-liquid for as long as possible and preserve its quality, taste and colour, store it in its original bottle and ideally away from light, heat and air. Despite these precautions, the e-liquid may sometimes take on a slightly brownish tint. Safe and suitable for consumption, this colour is due to the oxidation of nicotine and may also depend on the flavouring used in the e-liquid. It is generally advisable not to keep the same e-liquid in your clearomiser or pod cartridge for more than 5 days if you are not using it, in order to avoid leaks and excessive oxidation.
The DLUO (Best Before Date) or BBD (Best Before Date) is an indicative date. Once the e-liquid's date has passed, it may lose its taste qualities and its appearance (colour, consistency). An e-liquid fresh from the factory will have a BBD of approximately 2 years. Even past its BBD, the e-liquid remains suitable for vaporisation and will not be harmful to health.
You may also like