PnP Vinci Coils - Voopoo

Compatible with the Drag, Vinci and V.Suit pods from the Voopoo brand, the PnP Vinci coils are highly efficient. To ensure compatibility, the pods must be equipped with a PnP cartridge or clearomizer. They are suitable for both beginner and experienced vapers. These coils offer good flavor delivery and sufficient vapor volume. Various versions of Voopoo PnP Vinci coils are available. These have been manufactured to meet different needs. As a result, the propylene glycol and vegetable glycerin (PG/VG) ratio of the chosen e-liquid must be suited to the coil used. These electronic cigarette products offer a tight MTL vape or indirect inhalation, an airy direct inhalation vape, a restrictive indirect vape, or an economical vape. The Voopoo PnP coils are sold in packs of 5.

Specifications of the Voopoo PnP Vinci coils

The Voopoo PnP Vinci coils are replacement products that are compatible with many of the brand's electronic cigarette kits, such as the Argus, Drag, Navi and Vinci ranges. They meet a wide range of needs and preferences. With these coils, it is possible to vape in indirect draw, restrictive direct draw and 100% direct airflow draw. Powerful and economical, they allow you to alternate between very generous clouds and small puffs highly concentrated in flavors. Voopoo offers 12 coil models in the PnP Vinci range:  

• PnP Vinci Coil VM-1 0.3 ohm: this is a powerful mesh coil used between 32 and 40 watts. It is vaped with low-nicotine e-liquids in indirect inhalation.
• PnP Vinci Coil VM-3 0.45 ohm: this mesh coil model should be vaped between 25 and 35 watts. It is economical and reserved for restrictive direct vaping. With this coil, it is recommended to vape e-liquids low in nicotine.
• PnP Vinci Coil VM-4 0.6 ohm: this is a mesh coil version dedicated to use between 20 and 28 watts. It allows restrictive direct inhalation, but also indirect inhalation. The recommended nicotine level for the e-liquid should be below 12 mg.
• PnP Vinci Coil VM-5 0.2 ohm: this coil variant is intended for liquids with low nicotine dosage (below 6 mg). It is used between 40 and 60 watts and offers direct inhalation (DL).
• PnP Vinci Coil VM-6 0.15 ohm: this is a mesh coil designed for e-liquids with low nicotine levels, i.e. below 6 mg. With this coil, vaping is done in direct inhalation and should be used between 60 and 80 watts.
• PnP Vinci Coil Tm-2 0.8 ohm: this is a coil designed for indirect inhalation (MTL). It accepts a power range between 12 and 18 watts and can be paired with nicotine salt e-liquids.
• PnP Vinci Coil TR1 - 1.2 ohm: this is an economical single-coil. It is used between 10 and 15 watts. It suits high nicotine levels and offers a very tight, flavor-rich MTL vape.
• PnP Vinci Coil DW60 - 0.6 ohm: this coil model is compatible with every nicotine level. Its usage range is between 18 and 23 watts. It allows a tight MTL vape. This version offers abundant vapor.
• PnP Vinci Coil DW80 - 0.8 ohm: this coil model is compatible with every nicotine level. Its usage range is between 12 and 18 watts. It allows a tight MTL vape. This version offers abundant vapor. (formerly TM2)

Voopoo PnP Vinci coil compatibility

The Voopoo PnP Vinci coils are compatible with virtually all of the manufacturer's kits and clearomizers. They can be used with the VinciR, VSuit, DragMini, Drag2, DragS, Drag Baby Trio, Vinci AIR, DragMax, Vinci, Argus Pro, VinciX, ArgusAir, ArgusGT, DragX, Argus40W, Seal 40W, Musket120W, Doric60W, Drag E60, Drag H80 kits. These coils are also compatible with the PnP Tank clearomizers, Navi Cartridges, Drag Refresh Edition Cartridge, Vinci AIR Cartridge, Invader GT Cartridge, V Suit Cartridges, Drag S/X Cartridges, Vinci Cartridge.

How to change your PnP Vinci coil?

To change the PnP Vinci coil, the vaper must first remove the cartridge from the battery and pull out the used coil by carefully unclipping it. A key is provided to make extraction easier. Then, they must push the new coil in to clip it in place and reinsert the cartridge into the battery. To avoid any dry hit and burnt taste, it is necessary to wait approximately 10 minutes after changing the coil, so that it can properly absorb the e-liquid.

What is the lifespan of a Voopoo coil?

The lifespan of a Voopoo coil depends on several parameters. It is particularly influenced by the e-liquid chosen and the frequency at which it is vaped. For example, the coil should be replaced as soon as vapor decreases, a burnt taste appears, or there is a loss of flavor. Generally, the Vinci coil should be changed every 2 or 3 weeks, depending on the factors mentioned above. However, if the user vapes a heavy e-liquid, i.e. one high in vegetable glycerin, and their consumption is quite significant, then the product needs to be changed more quickly, and vice versa.

Voopoo brand

The Voopoo brand is recognized worldwide in the field of electronic cigarettes. This market leader in the vaping sphere was initially specialized in automation for the industrial and medical sectors, as well as in research and development of cutting-edge electronics. In 2014, the company decided to enter the world of vaporization, leveraging its electronics expertise. The brand was truly launched in 2016 after the acquisition of Woodyvapes, a highly renowned high-end vape brand. A year later, it entered into a partnership with the GENE corporation. The latter is the originator of the chipsets, which allowed Voopoo to become known worldwide very quickly. This hybridization expert offers iconic box mods, such as the Drag S box, the Drag X box, as well as pod kits like the Vinci. These pod mods are powerful, intuitive and stylish.