Flavour: spearmint
Composition: 50% Propylene Glycol and 50% Vegetable Glycerine (50/50 PG/VG)
Nicotine level: 0 mg (nicotine-free)
Packaging: 60 ml bottle filled with 50 ml of e-liquid
An e-liquid is a consumable intended exclusively for an electronic cigarette. The 60 ml format comes as a mix pack: a partially filled bottle of nicotine-free e-liquid, supplied with one or two 20 mg/ml nicotine shots. Once the nicotine shots have been poured into the bottle, you get 60 ml of e-liquid at 3 or 6 mg/ml. Its balanced 50/50 PG/VG ratio is suitable for most electronic cigarettes, for both MTL and RDL vaping.
The volume of e-liquid in the bottle is adjusted according to the number of nicotine shots supplied, so that in both cases you obtain 60 ml of e-liquid at the stated strength:
| Final strength | Bottle | Nicotine shots supplied | Final volume | Profile |
|---|---|---|---|---|
| 3 mg/ml | 50 ml of nicotine-free e-liquid | 1 nicotine shot of 10 ml at 20 mg/ml | 60 ml | Occasional smoker |
| 6 mg/ml | 40 ml of nicotine-free e-liquid | 2 nicotine shots of 10 ml at 20 mg/ml | 60 ml | Moderate smoker |
The nicotine strength is selected when ordering: it depends on the pack and cannot be changed afterwards without adding base or a nicotine shot.
Once mixing is complete, the bottle contains 60 ml: there is no room for an additional booster. For a different strength, 50 ml e-liquids and the 10 ml format allow you to adjust the dosage.
An e-liquid is made up of a base of propylene glycol (PG) and vegetable glycerine (VG), flavourings and, where applicable, nicotine. PG carries flavours and throat hit, while VG provides smoothness and vapour volume. In equal parts, the 50/50 ratio combines these two properties.
| PG/VG ratio | 70/30 | 50/50 | 30/70 |
|---|---|---|---|
| Flavour delivery | ●●●● | ●●●○ | ●●○○ |
| Throat hit | ●●●● | ●●●○ | ●○○○ |
| Vapour production | ●○○○ | ●●○○ | ●●●● |
| Suitable equipment | Pods, MTL | Pods, kits, MTL and RDL clearomisers | Mods, sub-ohm (DL) |
Thanks to its fluidity, a 50/50 e-liquid properly saturates the coils of most clearomisers and cartridges, without being too thin for tight-draw models.
50/50 is compatible with the vast majority of e-cigarettes. Here are the most suitable equipment categories and a few examples available from Le Vapoteur Discount:
| Equipment | Key points | Examples |
|---|---|---|
| E-cigarettes | Complete kits (battery + clearomiser), with simple or adjustable settings depending on the model. | Kit Q16 Pro – Justfog Kit PockeX Pocket AIO – Aspire Kit Coolfire Z80 Zenith 2 – Innokin |
| Pods | Compact format, refillable cartridges, use without complex settings. | Kit Luxe XR Max 2 – Vaporesso Kit Kiwi 2 – Kiwi Vapor Kit Pixo Max – Aspire |
| Clearomisers | Choose MTL or RDL models, compatible with 0.4 to 1.2 Ω coils. | Zenith 2 – Innokin Q16 Pro Plus – Justfog GOZ+ – Innokin Z Nano 3 – GeekVape |
The coil resistance and power determine the type of draw. With a 60 ml 50/50 e-liquid, vaped at 3 or 6 mg/ml, the following guidelines provide a consistent vape:
| Coil resistance | Type of draw | Recommended power |
|---|---|---|
| 1.0 to 1.2 Ω | MTL – tight draw, similar to a cigarette | 10 to 18 W |
| 0.6 to 0.9 Ω | MTL to RDL – medium draw | 15 to 25 W |
| 0.4 to 0.5 Ω | RDL – semi-airy draw | 25 to 40 W |
Always start at the bottom of the power range stated on the coil, then increase gradually. For the drip tip, a 510 mouthpiece is suitable for most uses; an 810 drip tip can be used for RDL with clearomisers designed for this format.
Remember to recycle: dispose of empty bottles at suitable collection points.
Le Vapoteur Discount selects e-liquids from the leading vaping brands, checked for compliance and traceability. Le Vapoteur Discount also designs its own e-liquids made in France, divided into several ranges:
| Range | Flavour profile | Formats |
|---|---|---|
| Le Vapoteur Discount | The original range: single-flavour classic, fruity, gourmet and menthol e-liquids | 10 ml and 50 ml |
| Classic Time | Pure classic and gourmet classic flavours | 10 ml, nicotine salts and 50 ml |
| First One | Fruity and gourmet recipes | 10 ml and 50 ml |
| Fruity Fresh | Fresh fruit duos and trios | 10 ml and 50 ml |
| The Raid | Berry flavours, original or chilled | 10 ml and 50 ml |
| Flower Season | Floral and fruity blends | 10 ml and 50 ml |
| Goody | Gourmet flavours: pastries, caramel, coffee and nuts | 10 ml and 50 ml |
| Sunset Hour | Cocktail-inspired flavours | 10 ml and 50 ml |
| Les Bangers | Fruity, sweet, drink and gourmet recipes | 10 ml and 50 ml |
| Puff Attack | Fruity and fresh flavours inspired by puffs | 10 ml nicotine salts and 50 ml |
| Trinity X | Fruity, fresh or sweet blends | 50 ml |
Features
| Propylene Glycol | 50% |
|---|---|
| Vegetable Glycerin | 50% |
| Capacity | 60 ml |
| Brand | Al Fakher |
| Flavor type | Menthol |
| Product type | E-liquid |
Delivery times and costs, returns, right of withdrawal and warranty are detailed on our dedicated page.
See delivery and returnsIf you don't smoke, don't vape.
E-liquid for electronic cigarettes
E-liquid refills labelled in accordance with Article 48 of Regulation (EC) No 1272/2008
Warning: follow the instructions for use
From 2.5 to 16.6 mg/ml: H302. Harmful if swallowed (category 4)
Super rapport qualité prix
Bonjour,
Votre avis nous fait vraiment plaisir et c’est une belle récompense pour toute l’équipe. 💛
Que ce soit un petit coup de cœur ou un vrai « waouh », savoir que votre expérience vous a satisfait nous motive à continuer à vous proposer le meilleur.
Merci d’avoir pris le temps de partager votre expérience avec nous. On espère vous retrouver très vite pour une nouvelle expérience tout aussi réussie ! 🌟
À bientôt,
Related products
An e-liquid (or liquid for electronic cigarettes) is the product that generates vapour when heated by the coil of an electronic cigarette. Unlike traditional cigarettes, there is no combustion. The e-liquid is composed of a base (propylene glycol and vegetable glycerin), flavourings, and optionally nicotine. It determines the taste, throat sensation, cloud production, and overall vaping experience.
An e-liquid generally contains four elements:
Some formulas also use alternative vegetable-based carriers (Végétol) for extra smoothness.
An e-liquid with nicotine is intended for vapers who wish to replace the traditional cigarette. Nicotine acts on the feeling of satisfaction and reduces cravings. Nicotine-free e-liquids are used either at the end of a quitting process or purely for the enjoyment of vaping, even though it is not recommended to vape if you are not a smoker. Choosing the right nicotine strength is essential to avoid a poor experience (irritation or cravings). The nicotine dosage depends on your previous cigarette consumption. A light smoker will not have the same needs as a heavy smoker. Too low a strength can lead to frustration and relapse, while too high a strength can cause throat discomfort. The aim is to find a balance between hit, sensation and vaping comfort, adjusting progressively as needed. A low dosage of 0, 3 or 6 mg/ml nicotine is generally recommended for light or occasional smokers (fewer than 7 cigarettes per day), and a high dosage of 20 mg/ml nicotine salt for a heavy smoker (one pack of cigarettes or more). However, this dosage can be adjusted depending on your electronic cigarette and your vaping style.
Nicotine salt is a more stable and smoother form of nicotine to inhale. It provides rapid absorption with a less harsh throat hit, even at high concentrations. Nicotine salt e-liquids are particularly suitable for beginner vapers, former heavy smokers, and low-wattage MTL kits. Various nicotine salt strengths are available. The best known and most effective is 20 mg/ml, very well suited to heavy smokers. However, a strength of 10 mg/ml can work very well for a regular or occasional smoker.
A nicotine booster is a nicotine-concentrated bottle designed to be added to a large-format e-liquid. It allows you to adjust the final nicotine strength depending on the quantity added. Flexible and economical, this solution lets you boost your large-format e-liquid to 3 or 6 mg/ml of nicotine. For a 50 ml e-liquid, adding one nicotine booster will give you 3 mg/ml; two nicotine boosters will bring your e-liquid to 6 mg/ml.
The propylene glycol / vegetable glycerin ratio has a strong influence on the vaping experience.
The choice therefore depends on the wattage and compatibility with your electronic cigarette. If in doubt, the most common ratio remains 50/50 PG/VG. Balanced, it allows versatile use on MTL, RDL and light DTL electronic cigarette models (between approximately 15 and 40 watts).
Vegetable-based or Végétol e-liquids replace traditional propylene glycol. They are often gentler on the throat, better tolerated by vapers who are sensitive to PG, and offer a smoother vape without compromising on flavour. However, they should be used in MTL at low wattage (minimum 30 watts) to avoid the risk of leaks and to preserve the quality of the product.
Yes, CBD e-liquids are designed for vaping and generally do not contain nicotine. They offer a different sensation, focused on relaxation, with no addictive effect. They should be used at moderate wattage to preserve the quality of the product. We recommend using them with an MTL e-cigarette with a tight draw.
E-liquids are considered a much healthier alternative to smoked tobacco. They are formulated from ingredients certified as safe for health, unlike the 7,000 harmful substances found in traditional cigarettes. Nevertheless, to choose a safe e-liquid, a few precautions should be taken, such as buying your e-liquid from a recognised retailer like Le Vapoteur Discount, or checking the composition and origin by opting for reputable and regulated brands.
An e-liquid manufactured in France meets strict requirements and European directives in terms of traceability, quality control and safety. A guarantee of quality and transparency for the consumer, French and European brands generally have their own laboratory for developing their e-liquid formulas and are required to have those formulations assessed by an independent laboratory before being placed on the market. These steps ensure that e-liquids are safe for vapers. French and European quality standards prohibit undesirable substances and provide a more secure framework for vaping.
To keep your e-liquid for as long as possible and preserve its quality, taste, and colour, you should store it in its original bottle and ideally away from light, heat, and air. Despite these precautions, the e-liquid may sometimes take on a slightly brown tint. Safe and fit for consumption, this colour is due to the oxidation of nicotine and may also depend on the flavouring used in the e-liquid. It is generally recommended not to keep the same e-liquid in your clearomiser or pod cartridge for more than 5 days if you are not using it, to avoid leaks and excessive oxidation.
The BBD (Best Before Date) or MHD (Minimum Durability Date) is an indicative date. Once the e-liquid's date has passed, it may lose its taste qualities and appearance (colour, fluidity). An e-liquid fresh from the factory will have a BBD of approximately 2 years. Even past its BBD, the e-liquid remains fit for vaporisation and will not be harmful to health.
You may also like