Flavour: mango, cool
Composition: 50% Propylene Glycol and 50% Vegetable Glycerine (50/50 PG/VG)
Nicotine strength: 0 mg (nicotine-free)
Packaging: 60 ml bottle filled with 50 ml of e-liquid
An e-liquid is a consumable intended exclusively for an electronic cigarette. The 60 ml format comes as a mix pack: a partially filled bottle of nicotine-free e-liquid, supplied with one or two 20 mg/ml nicotine shots. Once the nicotine shots have been poured into the bottle, you get 60 ml of e-liquid at 3 or 6 mg/ml. Its balanced 50/50 PG/VG ratio is suitable for most electronic cigarettes, for both MTL and RDL vaping.
The volume of e-liquid in the bottle is adjusted according to the number of nicotine shots supplied, so that in both cases you obtain 60 ml of e-liquid at the stated strength:
| Final strength | Bottle | Nicotine shots supplied | Final volume | Profile |
|---|---|---|---|---|
| 3 mg/ml | 50 ml of nicotine-free e-liquid | 1 nicotine shot of 10 ml at 20 mg/ml | 60 ml | Occasional smoker |
| 6 mg/ml | 40 ml of nicotine-free e-liquid | 2 nicotine shots of 10 ml at 20 mg/ml | 60 ml | Moderate smoker |
The nicotine strength is selected when ordering: it depends on the pack and cannot be changed afterwards without adding base or a nicotine shot.
Once mixing is complete, the bottle contains 60 ml: there is no room for an additional booster. For a different strength, 50 ml e-liquids and the 10 ml format allow you to adjust the dosage.
An e-liquid is made up of a base of propylene glycol (PG) and vegetable glycerine (VG), flavourings and, where applicable, nicotine. PG carries flavours and throat hit, while VG provides smoothness and vapour volume. In equal parts, the 50/50 ratio combines these two properties.
| PG/VG ratio | 70/30 | 50/50 | 30/70 |
|---|---|---|---|
| Flavour delivery | ●●●● | ●●●○ | ●●○○ |
| Throat hit | ●●●● | ●●●○ | ●○○○ |
| Vapour production | ●○○○ | ●●○○ | ●●●● |
| Suitable equipment | Pods, MTL | Pods, kits, MTL and RDL clearomisers | Mods, sub-ohm (DL) |
Thanks to its fluidity, a 50/50 e-liquid properly saturates the coils of most clearomisers and cartridges, without being too thin for tight-draw models.
50/50 is compatible with the vast majority of e-cigarettes. Here are the most suitable equipment categories and a few examples available from Le Vapoteur Discount:
| Equipment | Key points | Examples |
|---|---|---|
| E-cigarettes | Complete kits (battery + clearomiser), with simple or adjustable settings depending on the model. | Kit Q16 Pro – Justfog Kit PockeX Pocket AIO – Aspire Kit Coolfire Z80 Zenith 2 – Innokin |
| Pods | Compact format, refillable cartridges, use without complex settings. | Kit Luxe XR Max 2 – Vaporesso Kit Kiwi 2 – Kiwi Vapor Kit Pixo Max – Aspire |
| Clearomisers | Choose MTL or RDL models, compatible with 0.4 to 1.2 Ω coils. | Zenith 2 – Innokin Q16 Pro Plus – Justfog GOZ+ – Innokin Z Nano 3 – GeekVape |
The coil resistance and power determine the type of draw. With a 60 ml 50/50 e-liquid, vaped at 3 or 6 mg/ml, the following guidelines provide a consistent vape:
| Coil resistance | Type of draw | Recommended power |
|---|---|---|
| 1.0 to 1.2 Ω | MTL – tight draw, similar to a cigarette | 10 to 18 W |
| 0.6 to 0.9 Ω | MTL to RDL – medium draw | 15 to 25 W |
| 0.4 to 0.5 Ω | RDL – semi-airy draw | 25 to 40 W |
Always start at the bottom of the power range stated on the coil, then increase gradually. For the drip tip, a 510 mouthpiece is suitable for most uses; an 810 drip tip can be used for RDL with clearomisers designed for this format.
Remember to recycle: dispose of empty bottles at suitable collection points.
Le Vapoteur Discount selects e-liquids from the leading vaping brands, checked for compliance and traceability. Le Vapoteur Discount also designs its own e-liquids made in France, divided into several ranges:
| Range | Flavour profile | Formats |
|---|---|---|
| Le Vapoteur Discount | The original range: single-flavour classic, fruity, gourmet and menthol e-liquids | 10 ml and 50 ml |
| Classic Time | Pure classic and gourmet classic flavours | 10 ml, nicotine salts and 50 ml |
| First One | Fruity and gourmet recipes | 10 ml and 50 ml |
| Fruity Fresh | Fresh fruit duos and trios | 10 ml and 50 ml |
| The Raid | Berry flavours, original or chilled | 10 ml and 50 ml |
| Flower Season | Floral and fruity blends | 10 ml and 50 ml |
| Goody | Gourmet flavours: pastries, caramel, coffee and nuts | 10 ml and 50 ml |
| Sunset Hour | Cocktail-inspired flavours | 10 ml and 50 ml |
| Les Bangers | Fruity, sweet, drink and gourmet recipes | 10 ml and 50 ml |
| Puff Attack | Fruity and fresh flavours inspired by puffs | 10 ml nicotine salts and 50 ml |
| Trinity X | Fruity, fresh or sweet blends | 50 ml |
Features
| Propylene Glycol | 50% |
|---|---|
| Vegetable Glycerin | 50% |
| Capacity | 60 ml |
| Brand | Al Fakher |
| Flavor type | Fruity / Fresh |
| Product type | E-liquid |
Delivery times and costs, returns, right of withdrawal and warranty are detailed on our dedicated page.
See delivery and returnsIf you don't smoke, don't vape.
E-liquid for electronic cigarettes
E-liquid refills labelled in accordance with Article 48 of Regulation (EC) No 1272/2008
Warning: follow the instructions for use
From 2.5 to 16.6 mg/ml: H302. Harmful if swallowed (category 4)
Be the first to leave a review!
This product has no reviews yet. Try it, share your experience and help others make the right choice.
Related products
An e-liquid (or electronic cigarette liquid) is the product that generates vapour when heated by the coil of an e-cigarette. Unlike traditional cigarettes, there is no combustion. The e-liquid is composed of a base (propylene glycol and vegetable glycerin), flavourings, and optionally nicotine. It is what determines the taste, the throat sensation, the cloud production, and the overall vaping experience.
An e-liquid generally contains four elements:
Some formulas also use alternative plant-based bases (Végétol) for a smoother experience.
An e-liquid with nicotine is intended for vapers who want to replace traditional cigarettes. Nicotine acts on the feeling of satisfaction and reduces cravings. Nicotine-free e-liquids are used either at the end of a quit-smoking journey or purely for the pleasure of vaping, although it is not recommended to vape if you are not a smoker. Choosing the right nicotine level is essential to avoid a bad experience (irritation or cravings). The nicotine dosage depends on your previous cigarette consumption. A light smoker will not have the same needs as a heavy smoker. A level that is too low can lead to frustration and relapse, while a level that is too high can cause throat discomfort. The aim is to find a balance between throat hit, sensation, and vaping comfort, adjusting gradually as needed. A low dosage of 0, 3 or 6 mg/ml of nicotine is generally recommended for light smokers or occasional smokers (fewer than 7 cigarettes per day), and a high dosage of 20 mg/ml of nicotine salt for heavy smokers (1 pack of cigarettes or more). However, this dosage can be adjusted depending on your electronic cigarette and your vaping style.
Nicotine salt is a more stable form of nicotine that is gentler on inhalation. It provides rapid absorption with a less harsh throat hit, even at high concentrations. Nicotine salt e-liquids are particularly suited to beginner vapers, former heavy smokers, and low-wattage MTL kits. Various nicotine salt strengths are available. The most well-known and effective is 20 mg/ml, which is very well suited to heavy smokers. However, a 10 mg/ml strength can work very well for regular or occasional smokers.
A nicotine shot is a concentrated nicotine bottle designed to be added to a large-format e-liquid. It allows you to adjust the final nicotine strength depending on the quantity added. Flexible and cost-effective, this solution lets you boost your large-format e-liquid to 3 or 6 mg/ml of nicotine. For a 50 ml e-liquid, adding one nicotine shot will give you 3 mg/ml; two nicotine shots will bring your e-liquid up to 6 mg/ml.
The propylene glycol / vegetable glycerin ratio has a strong influence on the vaping experience.
The choice therefore depends on the wattage and compatibility with your e-cigarette. If in doubt, the most common ratio remains 50/50 PG/VG. Balanced, it allows versatile use across MTL, RDL, and light DTL e-cigarette models (approximately between 15 and 40 watts).
Plant-based or Végétol e-liquids replace traditional propylene glycol. They are often gentler on the throat, better tolerated by vapers who are sensitive to PG, and offer a smoother vape with no compromise on flavour. However, they should be used in MTL mode at low wattage (minimum 30 watts) to avoid the risk of leaks and to preserve the quality of the product.
Yes, CBD e-liquids are designed for vaping and generally contain no nicotine. They offer a different sensation, focused on relaxation, with no addictive effect. They should be used at moderate wattage to preserve the quality of the product. A tight-draw MTL e-cigarette is recommended for use with them.
E-liquids are considered a far healthier alternative to smoked tobacco. They are formulated from ingredients certified as safe, unlike the 7,000 harmful substances found in traditional cigarettes. Nevertheless, to choose a safe e-liquid, a few precautions should be taken, such as purchasing your e-liquid from a recognised retailer like Le Vapoteur Discount, or checking the composition and origin by favouring reputable and regulated brands.
An e-liquid manufactured in France meets strict requirements and European directives regarding traceability, control, and safety. As a mark of quality and transparency for the consumer, French and European brands generally have their own laboratory for developing their e-liquid formula and are required to have that formulation studied by an independent laboratory before bringing it to market. These steps all guarantee e-liquids that are safe for vapers. These French and European quality standards prohibit undesirable substances and provide a more secure framework for vaping.
To keep your e-liquid as long as possible and preserve its quality, taste, and colour, store it in its original bottle, ideally away from light, heat, and air. Despite these precautions, the e-liquid may sometimes take on a slightly brown tint. Safe and suitable for use, this colour is due to the oxidation of nicotine and may also depend on the flavouring used in the e-liquid. It is generally recommended not to keep the same e-liquid in your clearomiser or pod cartridge for more than 5 days if you are not using it, to avoid leaks and excessive oxidation.
The BBD (Best Before Date) or MHD (Minimum Durability Date) is an indicative date. Once the e-liquid's date has passed, it may lose its taste qualities and its appearance (colour, consistency). A freshly manufactured e-liquid will have a BBD of approximately 2 years. Even past the BBD, the e-liquid remains suitable for vaporisation and will not be harmful to health.