DotPod Plus 3 ml Cartridges (x2) - DotMod

DotPod 3 ml Cartridges by DotMod

Pack of 2 DotPod Plus cartridges with 3 ml capacity

Discover a pack of two cartridges for the excellent DotMod DotPod Plus Kit.

These are consumable products that should be changed on average every 3 weeks to guarantee an optimal vaping experience, with no ashy taste, no leaks and no flavour deterioration. This pack of 2 cartridges provides approximately 1.5 months of uninterrupted vaping minimum.

Four available vape options

You will have the choice between four different vape options depending on the coil resistance value: 

• 0.4 ohm: recommended power between 28 and 35 watts - for a semi-open draw vape (RDL), preferably to be used with a balanced e-liquid at 50/50 PG/VG.
• 0.6 ohm: recommended power between 22 and 24 watts - for a restricted semi-open draw vape (RDL or MTL), preferably to be used with a balanced e-liquid at 50/50 PG/VG.
• 0.8 ohm: recommended power between 16 and 20 watts - for a tight draw vape, close to a traditional cigarette (MTL), to be used with fluid e-liquids at 70/30 PG/VG. Ideal with high nicotine levels and nicotine salt e-liquids.
• 1.0 ohm: recommended power between 14 and 16 watts - for a very tight draw vape, close to a traditional cigarette (MTL), to be used with fluid e-liquids at 70/30 PG/VG. Ideal with high nicotine levels and nicotine salt e-liquids.

First use instructions for your cartridges

How to fill the cartridge?

To fill the DotPod Plus cartridge tank: 

• Remove the cartridge from the battery and lift the black silicone cover on the side;
• Fill with up to 3 ml of your favourite e-liquid;
• Prime your coil if this is the first use;
• Reattach the cartridge to the battery.

How to prime a cartridge?

The cartridge contains an integrated coil that must be primed on first use to avoid burning it. 

To do so:

• Remove the cartridge from the battery;
• Fill the tank with e-liquid as described above;
• Always with the battery removed, take 4 or 5 dry puffs to draw the liquid up into the coil cotton;
• Wait 5 to 10 mins;
• Reattach the cartridge to the battery, you can now vape.

When to change cartridges?

The DotPod Plus pod cartridges contain a coil, which is a consumable product that wears out and must be changed regularly for a healthy vape.

When the coil is too worn, it shows signs of weakness: 

• Burnt taste, ashy taste;
• Deterioration of your usual e-liquid flavours;
• Minor leaks;
• No detection by the battery (message "no coil", "no atomizer"...). 

Contents of the DotMod DotPod Plus cartridge box

• 2 x 3 ml cartridges, impedance of your choice
• 1 x User manual