Basque Hazelnut Cake 100 ml - Chubbiz

An e-liquid is a consumable intended exclusively for e-cigarettes. The 100 ml format is sold nicotine-free, generally in a 120 ml bottle designed to hold up to two boosters. It can be vaped as is at 0 mg/ml or supplemented with one or two nicotine boosters. For a higher strength, prepare the mix in a large graduated empty bottle. Rich in vegetable glycerine, it is thicker, gentler on the throat and produces dense vapour, for direct or restricted direct inhalation on sub-ohm equipment.

Adding a booster is optional: 100 ml e-liquid can be vaped perfectly without nicotine. With direct inhalation, nicotine is felt more strongly than with MTL: with a 30/70 e-liquid, lower strengths are preferred.

The resulting strengths are rounded (exactly 1.8, 3.3, 4.6 and 5.7 mg/ml). The original 120 ml bottle holds a maximum of two boosters: from three boosters onwards, the mixture must be transferred to a large bottle. For DL vaping with coils below 0.4 Ω, a strength above 3 mg/ml quickly becomes irritating: two boosters are generally sufficient. For a nicotine requirement above 6 mg/ml, the 10 ml format or nicotine salts are more suitable.

Up to 3 mg/ml, in the original bottle:

For approximately 4.5 or 6 mg/ml, in a large graduated bottle:

Find all empty bottles in the DIY accessories section.

Le Vapoteur Discount boosters come in 10 ml bottles (the strength is shown on each product page). The nicotine type and base alter the throat sensation. With a 30/70 e-liquid, a 50/50 or nicotine salt booster preserves smoothness; with 50/50 boosters, the mixture remains close to 35/65.

Find all products in the nicotine boosters category.

An e-liquid consists of a base of propylene glycol (PG) and vegetable glycerine (VG), flavourings and, where applicable, nicotine. PG carries flavours and the throat hit, while VG provides smoothness and vapour volume. With 70% VG, this ratio prioritises vapour density and a smooth throat sensation.

More viscous, a 30/70 e-liquid requires coils with large e-liquid inlets. In a pod or MTL clearomiser, it does not saturate the cotton properly and may cause dry hits (a burnt taste).

30/70 performs at its best on sub-ohm equipment, capable of delivering power and supplying the coil correctly. Here are the most suitable equipment types and a few examples available from Le Vapoteur Discount:

The coil resistance value and power determine the draw type. With a 30/70 e-liquid, higher power is required to vaporise VG effectively:

Always follow the power range stated on the coil and start at the bottom of that range. For the drip tip, a wide 810-format mouthpiece makes direct inhalation easier and allows a large volume of vapour to pass through.

Remember to recycle: empty bottles should be taken to suitable collection points.

Le Vapoteur Discount selects e-liquids from leading vaping brands, checked for compliance and traceability. Le Vapoteur Discount also creates its own e-liquids made in France, divided into several ranges: