Kit Aegis Mini 2 (M100) - GeekVape

Kit Aegis Mini 2 (M100) - GeekVape

GeekVape is reinventing its worldwide success with the Aegis Mini 2 kit. Don't be fooled by its small size — this kit packs the power of the gods.

Can't wait to try this device and don't want to wait too long for delivery? You can get it delivered by Chronopost within 24 hours with Le Vapoteur Discount.

Why choose the GeekVape Kit Aegis Mini 2?

Compact and elegant design:

The Aegis Mini range gets a fresh look with the Aegis Mini 2 kit. With an angular design combining brushed aluminium, silicone, polycarbonate and even a premium leather back, the Aegis Mini 2 box is IP68 certified, meaning it is resistant to water, dust and drops. Its dimensions are as follows: 136 x 37 x 26mm for a total weight of 185.5g.

You can enjoy the best vape possible in any weather. This kit withstands extreme heat up to 50°C as well as extreme cold (-20°C). It also features a 1.08" colour TFT screen. It allows you to view all the information you need, such as your battery level, the power being delivered, or the value of the installed coil.

Power, battery life and capacity:

This Aegis Mini 2 kit features an integrated battery with a capacity of 2500mAh, allowing you to reach the maximum power of 100W offered by this kit.
It will also win you over with its 5 operating modes:

- Power Mode: allows you to choose the power in Watts;
- TC Ni/Ti/SS Mode: allows you to intelligently and automatically control the temperature in TC mode without needing to configure everything manually (only compatible with Ni200, Titanium and SS316 stainless steel coils);
- TCR Mode: allows you to set your heating coefficient to get the most out of your coils;
- VPC Mode: allows you to create your own power curve for a 100% personalised vape;
- Bypass Mode: allows you to optimise the performance of this kit like a mechanical mod while still benefiting from the safety features of an electronic mod.

Finally, with Geek-Care Touch' technology, you can carry the Aegis Mini 2 kit safely without risking accidental activation and the resulting burning of your coil. Simply slide the lock on the side of the Aegis Solo 2 box mod. 

Z Nano clearomizer:

The Aegis Mini 2 kit comes with the Z Nano 2 clearomizer. Equipped with a Bulb tank of 3.5 ml, this clearomizer has everything needed to meet all requirements.

It features the top airflow that proved so popular before. Finally, the Z Nano 2 clearomizer is fitted with a leak-proof top airflow system to protect you from e-liquid leaks while letting you enjoy large clouds.

To fill it, a quarter turn gives the top cap of the tank access to its two filling ports. All that's left to do is fill it with e-liquid (between 30/70 and 50/50 PG/VG).

Subohm coils for the most impressive clouds:

This kit comes with 2 premium Boost Coils:

- B Series 0.2 Ohm (pre-installed): for direct lung (DL) vaping, usable over a power range of 50 to 85W.
- B Series 0.6 Ohm: for restricted direct lung (RDL) vaping, usable over a power range of 15 to 25W.

Changing the coils is very simple. Simply unscrew the Z Nano 2 clearomizer from the Aegis Mini 2 box mod, open the base of the tank and pull the coil out of the tank. Then, make sure to prime the coil with a few drops of e-liquid and push the new coil into the bottom of the tank. Screw the clearomizer base back on and reattach it to the box. Wait about ten minutes and vape! 

PS: Don't throw away your coils — they can be recycled!

Contents of the GeekVape Kit Aegis Mini 2 (M100):

- 1 Aegis Mini 2 box mod
- 1 Z Nano 2 clearomizer of 3.5 ml
- 1 B-Series 0.2 Ohm coil (pre-installed)
- 1 B-Series 0.6 Ohm coil
- 1 coil removal tool
- 1 spare straight 2 ml pyrex tank
- 1 short 510 drip tip
- 1 USB-C cable
- 1 set of spare parts
- 1 user manual