Flavour: pear and apple
Composition: 40% Propylene Glycol and 60% Vegetable Glycerine (40/60 PG/VG)
Nicotine strength: 3 mg or 6 mg
Packaging:
- 3 mg: 75 ml bottle filled to 50 ml accompanied by one nicotine booster dosed at 18 mg/ml
- 6 mg: 75 ml bottle filled to 40 ml accompanied by two nicotine boosters dosed at 18 mg/ml
Made in France by Pulp![]()
An e-liquid is a consumable intended exclusively for an electronic cigarette. The 60 ml format comes as a pack to mix: a partially filled bottle of nicotine-free e-liquid, supplied with one or two 20 mg/ml nicotine boosters. Once the boosters have been poured into the bottle, you get 60 ml of e-liquid at 3 or 6 mg/ml. Slightly richer in vegetable glycerine than a 50/50, it delivers more generous vapour and a softer hit, while still offering good flavour delivery, for semi-direct inhalation (RDL).
The volume of e-liquid in the bottle is adjusted according to the number of boosters supplied, so that in both cases you obtain 60 ml of e-liquid at the stated strength:
| Final strength | Bottle | Boosters supplied | Final volume | Profile |
|---|---|---|---|---|
| 3 mg/ml | 50 ml of nicotine-free e-liquid | 1 booster of 10 ml at 20 mg/ml | 60 ml | Occasional smoker, RDL vaping |
| 6 mg/ml | 40 ml of nicotine-free e-liquid | 2 boosters of 10 ml at 20 mg/ml | 60 ml | Moderate smoker, MTL or restricted RDL vaping |
The nicotine strength is selected when ordering: it depends on the pack and cannot subsequently be changed without adding base or a booster. With RDL, nicotine is felt slightly more strongly than with MTL: the 3 mg/ml pack is often the most comfortable.
The bottle is filled to 60 ml once mixing is complete: there is no room for an additional booster. For a different strength, 50 ml e-liquids and the 10 ml format allow you to adjust the dosage.
An e-liquid is made up of a base of propylene glycol (PG) and vegetable glycerine (VG), flavourings and, where applicable, nicotine. PG carries flavours and provides the throat hit, while VG adds smoothness and vapour volume. With 60% VG, this ratio sits between 50/50 and 30/70: denser vapour than a 50/50, a smooth throat sensation and flavours that remain well defined.
| PG/VG ratio | 70/30 | 50/50 | 40/60 | 30/70 |
|---|---|---|---|---|
| Flavour delivery | ●●●● | ●●●○ | ●●●○ | ●●○○ |
| Throat hit | ●●●● | ●●●○ | ●●○○ | ●○○○ |
| Vapour production | ●○○○ | ●●○○ | ●●●○ | ●●●● |
| Suitable equipment | Pods, MTL clearomisers | Pods, kits, MTL and RDL clearomisers | Versatile kits, RDL clearomisers | Mods, sub-ohm clearomisers (DL) |
Slightly thicker than a 50/50, a 40/60 e-liquid suits coils from 0.4 to 1.0 Ω. On a pod with a very tight draw (coil above 1.2 Ω), it may saturate the cotton more slowly.
40/60 performs best on versatile, RDL-oriented equipment that can properly power a 0.4 to 1.0 Ω coil. Here are the most suitable equipment families and a few examples available from Le Vapoteur Discount:
| Equipment | Key points | Examples |
|---|---|---|
| Electronic cigarettes | Versatile kits, adjustable from open MTL to RDL. | Kit Coolfire Z80 Zenith 2 – Innokin Gozee Kit – Innokin GTX One Pro 40 W Kit – Vaporesso |
| Pods | Pods with adjustable airflow, compatible with 0.4 to 1.0 Ω coils. | Kit Luxe XR Max 2 – Vaporesso Kit Pixo Max – Aspire Drag X3 Kit – Voopoo |
| Tanks | Choose RDL models compatible with 0.4 to 1.0 Ω coils. | Zenith 2 – Innokin Z Nano 3 – GeekVape GOZ+ – Innokin |
The coil resistance and power determine the draw type. With a 60 ml 40/60 e-liquid, the following guidelines provide stable vaping:
| Coil | Draw type | Suggested power |
|---|---|---|
| 0.8 to 1.0 Ω | MTL to RDL – intermediate draw | 15 to 22 W |
| 0.6 to 0.8 Ω | RDL – semi-airy draw | 20 to 30 W |
| 0.4 to 0.6 Ω | RDL – more open draw | 25 to 40 W |
Always start at the bottom of the power range shown on the coil, then increase gradually. As for the drip tip, a 510 mouthpiece suits an intermediate draw; for RDL, an 810 drip tip makes it easier for vapour to pass through on clearomisers designed for this format.
Remember to recycle: empty bottles should be taken to suitable collection points.
Le Vapoteur Discount selects e-liquids from leading vape brands, checked for compliance and traceability. Le Vapoteur Discount also develops its own e-liquids, made in France and divided into several ranges:
| Range | World | Formats |
|---|---|---|
| Le Vapoteur Discount | The original range: single-flavour classics, fruity, gourmet and menthol flavours | 10 ml and 50 ml |
| Classic Time | Pure classics and gourmet classics | 10 ml, nicotine salts and 50 ml |
| First One | Fruity and gourmet recipes | 10 ml and 50 ml |
| Fruity Fresh | Fresh fruit duos and trios | 10 ml and 50 ml |
| The Raid | Red fruits, natural or fresh | 10 ml and 50 ml |
| Flower Season | Floral and fruity combinations | 10 ml and 50 ml |
| Goody | Gourmet flavours: pastries, caramel, coffee, nuts | 10 ml and 50 ml |
| Sunset Hour | Cocktail-inspired flavours | 10 ml and 50 ml |
| Les Bangers | Fruity, sweet, drink and gourmet recipes | 10 ml and 50 ml |
| Puff Attack | Fruity and fresh flavours inspired by puffs | 10 ml nicotine salts and 50 ml |
| Trinity X | Fruity, fresh or confectionery blends | 50 ml |
Features
| Propylene Glycol | 40% |
|---|---|
| Vegetable Glycerin | 60% |
| Capacity | 60 ml |
| Origin | France |
| Brand | Pulp |
| Flavor type | Fruity |
| Product type | E-liquid |
| Collection | Pulp Kitchen |
Delivery times and costs, returns, right of withdrawal and warranty are detailed on our dedicated page.
See delivery and returnsIf you don't smoke, don't vape.
E-liquid for electronic cigarettes
E-liquid refills labelled in accordance with Article 48 of Regulation (EC) No 1272/2008
Warning: follow the instructions for use
From 2.5 to 16.6 mg/ml: H302. Harmful if swallowed (category 4)
Très gourmand
Pas encore goûté
correcte
Related products
An e-liquid (or electronic cigarette liquid) is the product that generates vapour when heated by the coil of an electronic cigarette. Unlike traditional cigarettes, there is no combustion. The e-liquid is composed of a base (propylene glycol and vegetable glycerine), flavourings, and optionally nicotine. It is what determines the taste, throat sensation, cloud production, and overall vaping experience.
An e-liquid generally contains four elements:
Some formulas also use alternative vegetable bases (Végétol) for added smoothness.
An e-liquid with nicotine is intended for vapers who wish to replace the traditional cigarette. Nicotine acts on the feeling of satisfaction and reduces cravings. Nicotine-free e-liquids are used either at the end of a cessation programme, or purely for the pleasure of vaping, although it is not recommended to vape if you are not a smoker. Choosing the right nicotine strength is essential to avoid a poor experience (irritation or cravings). The nicotine dosage depends on your previous cigarette consumption. A light smoker will not have the same needs as a heavy smoker. A strength that is too low can lead to frustration and relapse, while a strength that is too high can cause throat discomfort. The aim is to find a balance between throat hit, sensation, and vaping comfort, adjusting gradually if needed. As a general rule, a low dosage of 0, 3, or 6 mg/ml of nicotine is recommended for light or occasional smokers (fewer than 7 cigarettes per day), and a high dosage of 20 mg/ml of nicotine salt for heavy smokers (one pack of cigarettes or more). However, this dosage can be adjusted depending on your electronic cigarette and the way you vape.
Nicotine salt is a more stable and smoother form of nicotine to inhale. It provides rapid absorption, with a less harsh throat hit, even at high strengths. Nicotine salt e-liquids are particularly well-suited to beginner vapers, former heavy smokers, and low-wattage MTL kits. Nicotine salt comes in various strengths. The most well-known and effective is 20 mg/ml, which is ideal for heavy smokers. However, a strength of 10 mg/ml can work very well for a regular or occasional smoker.
A nicotine shot is a nicotine-concentrated bottle designed to be added to a large-format e-liquid. It allows you to adjust the final nicotine strength depending on the quantity added. Flexible and economical, this solution allows you to boost your large-format e-liquid to 3 or 6 mg/ml of nicotine. For a 50 ml e-liquid, adding one nicotine shot will give you 3 mg/ml, while two nicotine shots will bring your e-liquid up to 6 mg/ml.
The propylene glycol / vegetable glycerine ratio has a strong influence on the vaping experience.
The choice therefore depends on the wattage and compatibility with your electronic cigarette. If in doubt, the most common ratio remains 50/50 PG/VG. Balanced, it allows versatile use across MTL, RDL, and light DTL electronic cigarette models (approximately between 15 and 40 watts).
Vegetable-based e-liquids or those made with Végétol replace traditional propylene glycol. They are often gentler on the throat, better tolerated by vapers who are sensitive to PG, and offer a smoother vape without compromising on flavour. However, they should be used in MTL mode at low wattage (minimum 30 watts) to avoid the risk of leaks and to preserve the quality of the product.
Yes, CBD e-liquids are designed for vaping and generally contain no nicotine. They offer a different sensation, focused on relaxation, with no addictive effect. They should be used at moderate wattage to preserve the quality of the product. We recommend using them with a tight-draw MTL electronic cigarette.
E-liquids are considered a much healthier alternative to smoked tobacco. They are formulated from ingredients certified as safe for health, unlike the 7,000 harmful substances found in traditional cigarettes. Nevertheless, to choose a safe e-liquid, a few precautions should be taken, such as buying your e-liquid from a recognised retailer like Le Vapoteur Discount, or checking the composition and origin by favouring reputable and regulated brands.
An e-liquid manufactured in France meets strict requirements and European directives regarding traceability, quality control, and safety. As a guarantee of quality and transparency for the consumer, French and European brands generally have their own laboratory for developing their e-liquid formulas and are required to have these formulations assessed by an independent laboratory before being placed on the market. All these steps ensure that e-liquids are safe for vapers. These French and European quality standards prohibit undesirable substances and provide a more secure framework for vaping.
To keep your e-liquid for as long as possible and preserve its quality, taste and colour, it should be kept in its original bottle and ideally away from light, heat and air. Despite these precautions, the e-liquid may sometimes take on a slightly brown tint. Safe and suitable for consumption, this colour is due to the oxidation of nicotine and may also depend on the flavouring used in the e-liquid. It is generally advised not to keep the same e-liquid for more than 5 days in your clearomiser or pod cartridge if you are not using it, to avoid leaks and excessive oxidation.
The DLUO (Best Before Date) or DDM (Minimum Durability Date) is an indicative date. Once the e-liquid's date has passed, it may lose its taste qualities and appearance (colour, fluidity). An e-liquid fresh from the factory will have a DDM of approximately 2 years. Even past the DDM, the e-liquid remains suitable for vaporisation and will not be harmful to health.