❓ When and how should I replace the coil?

It is recommended to replace your e-cigarette coils when you notice certain signs indicating that they are worn out or in poor condition.

Here are the main indicators:

1. Burnt taste: If you notice a burnt taste, it means that the cotton in the coil is probably dry, which can happen when the coil is worn out or there is insufficient e-liquid. This unpleasant taste is a clear sign that it is time to change the coil.
2. Loss of flavour: If the flavour of your e-liquid becomes less intense, this is also a sign that the coil is starting to deteriorate. This may be due to a build-up of residue or wear on the coil.
3. Leaks or poor performance: If you notice e-liquid leaks, poor vapour production or difficulty drawing properly, this may be due to a worn or damaged coil.
4. Less dense vapour: If you no longer produce the same amount of vapour, even after adjusting your settings (power, airflow), this may also mean that the coil has reached the end of its life.
5. Frequency of use: How often you use your e-cigarette also plays an important role. Generally, it is advisable to change the coil every 1 to 2 weeks, but this may vary depending on use and the type of e-liquid used.

In summary, you should change the coil in your e-cigarette when you notice a loss of flavour, a burnt taste, reduced vapour production or leaking. As a general rule, check and change the coil every 1 to 2 weeks depending on your usage.

How do you change your e-cigarette coil?

Replacing the coil is a simple process. Here are the steps to follow:

1. Unscrew the clearomiser base: To access the coil, unscrew the base of the clearomiser. This will allow you to remove the metal part containing the coil.
2. Remove the old coil: Once the base has been unscrewed, remove the old coil by unscrewing or unclipping it, depending on your e-cig model.
3. Install the new coil: Insert the new coil in the designated place in the clearomiser. Make sure it is properly aligned and correctly screwed or clipped into place.
4. Prime the new coil: Before using it, it is recommended to prime the coil by saturating it with e-liquid. To do this, fill the e-liquid tank, close the tank and airflow inlets, then take several draws without pressing the fire button. This will draw e-liquid through the wicks.
5. Reassemble the clearomiser: After priming the coil, screw the clearomiser base back on correctly.

💡 Please note that the process may vary slightly depending on your e-cigarette model. Refer to the user manual for specific instructions.